Perforated Base Insulation Hangers


Perforated Base Insulation Hangers feature a spindle type perforated insulation anchor with a perforated metal base attached to metal pins. The 2″ x 2″ base is fabricated out of metal with the pin attached for impaling and installing various acoustic insulation materials.

Perforated Base Insulation Hangers are fabricated out of mild steel with the pin attached for impaling and installation on various acoustic materials such as fiberglass boards or mineral wool boards. These pins feature a 2 inches x 2 inches metal base with a vertical pin attached. The typical perforated insulation pin diameter is 12 gauge (0.105 inches diameter), and self-locking washers are used to lock the material to the pin. We stock various lengths of pins.

Insulation Hangers are generally mounted using general-purpose adhesive such as the Boss 180 Multi-Seal Anchor Adhesive.


  • Available in Mild Steel
  • Pin and plate manufactured from galvanized steel
  • 12 Gauge (0.105 inches) is standard
  • 0.105 inch diameter; plate: 2 inches x 2 inches
  • Standard Packs are:
    – 1,000 for 1 inch to 3.5 inches
    – 500 for 4.5 inches to 6.5 inches
  • Sold by the bag
Weight 15 lbs
Dimensions 12 × 7 × 7 in

Box of 200, Box of 500, Box of 1000


1⅝ inches, 2 inches, 2½ inches, 3½ inches, 4½ inches, 6½ inches


You may also like…

    Round Self-Locking Washers

    Aluminum Insulation Dome Caps

    Square Self-Locking Washers

    Boss 180 Anchor Pin System Adhesive